Filter
Top Products
11-8 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
This is an example of a ping failure:
@CMD LAN PING 157.156.53.5
LAN (Ethernet) Link: MM/DD/YYYY 12:48:20 (0179fc76:0179fc76) Rev 1.0.3
Current Time: 04/12/2000 15:15:49 @ Slot 10
LAN>PING 157.156.53.5: 56 data bytes
still trying...
still trying...
still trying...
still trying...
still trying...
still trying...
157.156.53.5 not responding
LAN>
@
LANSTAT Command
The LANSTAT command provides basic information about the current LAN status. Information about
the LAN status for previous periods is provided in the Network Traffic Report for Digital Networks.
Refer to the Reports chapter in this volume.
The LANSTAT command provides information about the current status: whether the LAN is UP or
DOWN and the state of the high-speed links. Following is an example of the screen for LANSTAT.
@LANSTAT
LAN STATUS: UP
LAST INITIALIZED ON MM/DD/YY AT 06:05 PM
DIGITAL NETWORKING STATUS: UP
−−−−−−−− HIGH−SPEED−LINK STATUS −−−−−−−−−−−−−−−−
LOCATION STATUS LAN−PRTCL OTHER
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
SELF − 3
CHCGO UP 2
NEWYRK DOWN −
DALLAS DOWN 1 OEM−FAIL
SFO UP 3
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
GWL STATUS: DOWN − GATEWAY LINK SYSTEM PARAMETER IS NOT ENABLED
@
The LAN status is always UP, INITIALIZING, or DOWN, as follow.