Filter
Top Products
Quick Reference Guide
Octel 200/300
Hardware
Octel 200/300 S.4.1 PB60019−01
Octel 300 Message Server Specifications
20–80%, noncondensing
80 micrograms per cubic millimeter (max)
<10 ppm
–200 to 10,000 feet (–61 to 3,048 meters)
–200 to 40,000 feet (–61 to 12,192 meters)
–200 to 10,000 feet (–61 to 3,048 meters)
0.1 g
Equipment room or office
No special requirements
22 inches (55.9 cm)
6 inches (15.2 cm)
1 inch (2.5 cm)
1 inch (2.5 cm)
2-wire, 2500-type; 2-wire, DID-type, optional
50-pin telco, four ports per connector with 4-port LIC, eight ports per
connector with 8-port LIC, twelve ports per connector with 12-port ILC12,
and sixteen ports per connector with 16-port DLC16, rear access; and
sixteen ports per DAC I/O panel (four-port DAC)
RS-232C, auto-baud-rate select, DB25, 300–38,400 bps
RS-232C, 1200, 2400, 4800, or 9600 bps; DB25
Bell 103/212A and CCITT V.22/CCITT V.22 bis. One per cabinet,
accessible from any telephony port.
Four RS-232C (2 DB9, 2 DB25) ports, rear access
DB9, rear access
Environmental Requirements (continued)
Humidity, Operating
Atmosphere, Particulate
Matter
Corrosive Gases
Altitude
Operating
Nonoperating, in transit
Nonoperating, in storage
Vibration, operational at
22–500 Hz
Installation Environment
Flooring
Cabinet Clearance
Front
Rear
Sides
Top
Interfaces
Telephone Ports
Port Connector
Serial Port
RS-232C
Integration Port
Internal Modem
Works Serial Ports
Alarm Relay