12-48 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
The Octel 200/300 displays the following screen. (There may be a delay
before the screen appears.)
Selected drive in slot C1 has been added
To reload the system.
Refer to the Installation chapter, Octel 200/300 Testing section, in this
volume.
. If adding Redundancy, refer to the Electronic Feature Delivery
section of this chapter for procedures about how to add system
features. Refer to the Feature Description volume, Hard Disk
Redundancy chapter, for details about the feature.
12. Choose option 1 —
ADD DISK.
Reload the System
13. Make sure the configuration
backup disk is write-enabled.
14. Insert the configuration backup
disk into the FD.
15. Press the lower button on the
CPU.
16. Log on to the system using the
maintenance password.
17. Verify correct system operation.