Filter
Top Products
Log Commands 7-15
Octel 200/300 S.4.1PB60019−01
Message Activity
To print message activity currently in the CPT log using the LOG command, at the @ prompt enter:
LOG PR CPT
Enter
To list all messages or specify a specific message number, enter the filter MS. In this example, this
command displays all records for message 3000, from the beginning of the log to the end.
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
>MS 3000
Integration Activity
To display integration activity using LOG, specify the type of integration to trace. Enter the filter TY x,
where x is the type of integration to trace. Enter TY INTG to show all integration activity.
- INTG_C. Card-based integration record (MIC, RIC, ATTIC, SL1, M1)
- INTG_CA. Card-based ANI integration record (MIC, RIC, ATTIC, SL1, M1)
- INTG_R. RS-232C integration record
- INTG_D. DTMF integration record
In addition to TY, you can also specify the following filters for integration:
- SL Slot number for card integration
- UN Unit number for card integration
- LI Link number for card integration
- SO Source of call (integration)
To display APlink activity using LOG, at the @ prompt enter:
LOG PR CPT
Enter
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
>TYAPS00791125
In this example, this command displays all Works for Serenade activity in the CPT log that occurred on
or after 11:25 a.m., July 9, 2000.