Filter
Top Products
9-42 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
18. Turn on the Octel 300, allow it to boot up, and then check for proper operation. If problems are
encountered consult the technical documentation or contact Technical Support for assistance.
19. Attach the “High Leakage Current Warning” Label (Part Number 445−6276−001)to the back of the
Octel 300. Place the label immediately above the PSU voltage label on the Power Filter Assembly.
The “High Leakage Current” warning is an alert that the Octel 300 must be properly grounded to
minimize safety concerns. Refer to the Installation chapter for important safety instructions regarding
message server grounding.