Filter
Top Products
Maintenance Commands 6-39
Octel 200/300 S.4.1PB60019−01
Table 6-2 Abbreviations for Channel/Port State (continued)
Port State
Abbreviation
Description
OMR OCTELNET MESSAGE RECEIVE
OMS OCTELNET MESSAGE SEND
QAD COLLECTING AN ADDRESS FOR A QUICK MESSAGE
QCK RECORDING A QUICK MESSAGE OR MESSAGE AFTER CALL
PAC PERSONAL ASSISTANCE CONFIGURATION
PDL PERSONAL DISTRIBUTION LISTS
QS1 QSIG TRANSFER IN PROGRESS − STATE 1
QS2 QSIG TRANSFER COMPLETION − STATE 2
RDY WAITING FOR COMMAND AT READY
RNM USER RECORD OWN NAME
SCR SCRIPTED GREETING
SLQ SELECT MESSAGE QUEUE
STA START COMMAND PROCESSING
STR START OF INITIAL LOGON BEFORE READY
TST SELFTEST IN PROGRESS OR PORT HAS FAILED SELFTEST
VMR NET MESSAGE RECEIVED - PROTOCOL 2
VMS NET MESSAGE SEND - PROTOCOL 2
WFA WAITING FOR MAILBOX ADDRESS AFTER RECEIVING #
WFD WAITING FOR FIRST DIGIT AFTER ANSWERING CALL
XPR TRANSPARENCY STATE FOR DPNSS/qsig (path replacement is in progress)
5KI VMX 5000 USER INTERFACE
Alarm Test
The TEST ALARM command tests the alarm callout feature. At the @ prompt, enter:
TE A
Enter
The message server attempts to call the string configured in System Parameter 31 — ALARM
NUMBER. If successful, the person answering the alarm call hears a message similar to the following:
“Beep-Beep-Beep-Beep. This is an alarm call from message server number 123. Error type O has
occurred. Press star to acknowledge alarm notification or press pound to connect to the modem.”
If not acknowledged, the message server disconnects the call after 1 minute and retries it every 10
minutes, until it is acknowledged (the listener presses
*
).
To log on for remote access, proceed as follows:
1. Press
#
. The line Beeps for up to 3 minutes, which allows time to connect the modem and the
terminal.
2. Press
#
when ready. This connects the modem, which enables remote access to the Octel 200/300.
. If the person answering the alarm call does not enter a second
#
, the server disconnects the call
and continues to retry every 10 minutes, until the call is acknowledged.