Filter
Top Products
8-46 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
# Description
100
NET MESSAGE SEND — OTHER SYSTEM BUSY
The number of times a network message call was terminated because the
destination system did not have enough idle ports.
(Protocols 1, 3, or 5 only) This peg is incremented if the destination system
responds during network communication that it has too few idle ports to accept a
network call.
101
DID/E&M INTERFACE INTERCEPTED IMMEDIATE
Number of times DID/E&M Interface calls were intercepted immediately.
102
DID/E&M INTERFACE INTERCEPTED RING-NO-ANSWER
Number of times DID/E&M Interface calls were intercepted due to
ring-no-answer.
103
DID/E&M INTERFACE INTERCEPTED DUE TO BUSY
Number of times DID/E&M Interface calls were intercepted due to busy.
104
DID/E&M INTERFACE INTERCEPTED SOMETHING WRONG WITH CALL
Number of times DID/E&M Interface calls were intercepted but something
was wrong with the call.
105
INVALID BUS MESSAGE TYPE
Received selftest results unexpectedly. Check for error in Hardware Error
Table.
106
DID/E&M INTERFACE REQUESTED CODE
Number of times DID/E&M Interface requested code.
107
DID/E&M INTERFACE REQUESTED TABLES
Number of times DID/E&M Interface requested tables.
108
DID/E&M INTERFACE REQUESTED TO INTERCEPT CALL IMMEDIATELY
Number of times DID/E&M Interface was instructed to intercept
immediately.
109 DID/E&M INTERFACE ERRORS DURING SELFTEST
Number of times DID/E&M Interface had errors to report from selftest.
110
DUPLICATE DEVICES DETECTED (MASTER Octel 200/300S)
Number of times duplicate devices were found.
111
MESSAGES RECEIVED FROM BUS
Number of times messages were received from the digital bus.
112
MESSAGES SENT TO BUS
Number of messages sent to the digital bus.
113
NETWORK MESSAGE RECEIVE DISK FULL
The number of times the local system reported the disk was full when a
network location was attempting to deliver a message.