In-10 Installation and Maintenance Manual Master Index
Octel 200/300 S.4.1 PB60019-01
system/voice disks, 2-16
Telemarketing Line Card, 2-6
Voice Control Unit, 2-9
voice disk drives, 2-5
voice storage disks, 2-16
Works ACP card, 2-7
Works disk drive, 2-3, 2-5
Works hard disk, 2-17
Hardware errors, 8-5–8-39
alarm outcall scheduling, 8-6
Hardware requirements, MD110, 14−8
HD. See Hard Disk
HELP command, 6-11
hot standby, 2-16
Hunt group, 3-2, 3-8
test, 4−33
Hunt groups. See Preparing the Phone System
I
I/O ports, 2-10
power supply, identification, 2-11
PSU. See Power Supply Unit
Incoming call
call processing report, 5-25
processing, 3-3
Incoming Call Restriction, INSTALL program, 1-19
Initial digits expected, NUMBERING PLAN Table,
12−3, 12−9, 12−14
Inspecting, cabinet, 4−1
INSTALL
command, 4−24
entering configuration database, 4−24
program, 4−24
INSTALL program, 1-1–1-32
announce calls to intercept index, 1-22
auto transfer to assistance index, 1-21
Call Queuing, 1-21
Call Queuing message mailbox index, 1-21
Company Greeting mailbox index, 1-17
default answers, 1-1
default existing mailbox, 1-10
default new mailbox, 1-10
default security code, 1-10
Enter key, 1-1
entering, 1-4
exiting, 1-5
before INSTALL is complete, 1-27–1-32
exiting and continuing, 1-28
group fax number, 1-22
Incoming Call Restriction, 1-19
intercept position, 1-17
LOCATION Table, 1-14
maximum message length index, 1-21
maximum number of messages index, 1-21
message with auto transfer index, 1-21
networking
protocol 2, 1-14
protocol 4, 1-14
protocol 5, 1-14
protocols 1 and 3, 1-14
offsite dial system parameter digits index, 1-21
offsite end with sysp digits, 1-21
offsite prefix digits index, 1-20
offsite speak delay index, 1-20
offsite speak times index, 1-20
order of questions, 1-2
pre-load all tables, 1-30, 1-31
questions for “other” phone systems, 1-25–1-26
quick greeting activation index, 1-21
reinstall, 1-28
reinstallation, 1-4
restarting, 1-27
Return key, 1-1
serial number, 1-8
Single Digit Menus, 1-19
understanding, 1-1–1-3
using, 1-4–1-6
INSTALL program, command, 6-11
Installation
−48 VDC power supply unit, 4−10
air filter, 9-51
DC subassemblies, 9-46, 9-48
field wiring, 9-48
digital networking, 8−43
digital trunk interface card, 9-18
disk drive backplane, 9-58
fan panel, 9-49
fan tray, 9-50
fax application processor, 9-24
floppy disk drive, 9-28
hard disk drive, 9-26
hardware, 4−21–4−23
LAN card, 9-16
line interface card, 9-14
load resistor assembly, 9-60
materials, 4−10
motherboard assemby, 9-53, 9-54, 9-55
option control chip, 9-62
power filter assembly, 9-32
procedure, 4−10
procedures, 4−4–4−13
power requirements, 4−4
site requirements, 4−4
required equipment, 4−13
25-pair cable, 4−26