Filter
Top Products
7-12 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
@LT6
Enter start time : Year Month Day Hour Minute or C (continuous)
:
MM/DD/YY HH:MM:SS PRT TYPE EVENT AUX MBX/EXTN MSG# SL U L SOURCE
04/05/00 09:56:23 040 INTG_C FWD_INT BUSY 4373 09 1 4 1705
04/05/00 09:57:49 041 INTG_C DIR_EXT 800 10 11
04/05/00 9:57:54 040 INTG_C ONHOOK 09 1 4
04/05/00 09:58:16 043 INTG_C FWD_EXT NO_ANSWER 4334 10 1 3 100
Option 7: Aplink Activity
Select 7 to display Works for Serenade system activity. The activities displayed are:
- LOST. The data link between the Octel 200/300 CPU and the Works for Serenade system is down.
- SYNC. The data link is restored.
Using the LOG PR CPT Command
The LOG PR CPT command displays the same activities as are filtered with LIST TRACE.
With the LOG PR CPT command, different combinations of print options and filters can be specified to
consolidate information and focus the display on specific types of trace activities. Use LOG PR CPT to
do the following:
- Set filter for records with FAX_CHN and FAX_MSG.
- Set start and end times for any trace.
- Review timing and sequence of all high-level communication to and from the LAN for Digital
Networking.
To use the LOG command for CPT activities, at the @ prompt, enter:
LOG PR CPT
Enter
.
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
Refer to the Log Command section for an explanation of LOG print options.