Filter
Top Products
1-24 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
Save the configuration on your backup configuration disk. Leave the disk in the floppy disk drive.
The Octel 200/300 must be reloaded to operate correctly. To reload, at the @ prompt, enter
RESTA 2
Enter
After the Octel 200/300 has reloaded, it is recommended that you enter the UPDATE program and
use the LIST command to review the answers you just entered. You might also need to change some
of the system parameter values. Refer to the Configuration volume, System Parameter Table chapter.
Use the UPDATE program to modify system parameters and to set COS Attributes.