Filter
Top Products
Log Commands 7-3
Octel 200/300 S.4.1PB60019−01
- \ (backslash)
Before pressing
Enter
, you can enter a backslash (\) to designate that additional print options or
filters follow on another line. If the print options and filters designated are longer than one line, the
backslash connects the additional line to the command string. The backslash can also be used at any
time in the line to segment criteria to identify print options or filters requested easily.
- Mask
Not used at Maintenance level.
- C
Press the letter C to designate that the records should print continuously from the time the log
command is initiated.
BE Option: Set Begin Time of Log Files
Use the BE option to set the beginning time for the CDR or MAC log. Once the begin time is set, records
collected before this date are no longer accessible.
Setting the begin time for a log facilitates the interface to an external data collection package that periodically
collects the current data in the log. You must specify the year, month, and day; the hour and minute are
optional. To set the begin time, at the @ prompt, enter:
LOG BE X
Enter
In this command, x is CDR or MAC.
Enter the year, month, day, hour, and minute of the begin time. Separate the information by a space.
@LOG BE CDR
Specify Beginning Time
>00 1 6
BEGIN TIME SET FOR LOG
MF Option: Modify Filters
Use the MF option with the CDR log to enable or disable the filters for logging combinations of
transaction and status types. Refer to the Call Detail Record Log section for information about MF for
this log. Enter:
LOG MF CDR
PF Option: Display Filters
Use the PF option with the CDR log. Enabled or disabled filters that are modified by the LOG MF command
can also be displayed with the LOG PF command. Refer to the Call Detail Record Log section for
information about PF for this log. Enter:
LOG PF CDR