Filter
Top Products
DTIC 10-19
Octel 200/300 S.4.1PB60019−01
Ports on the DTIC Configured for Ringing but Do Not Answer Calls
This problem could be caused by the message server expecting dial tone when initializing the ports. The
message server, as part of initialization, tells each port to go off hook, listen for dial tone, send a DTMF
string, and then go on hook.
At the @ prompt, use the PS command to see whether the port in question has the code NDT for no dial
tone or ERR for error. To determine whether the failing port number is actually on the DTIC or on
another line card instead, use the LIST SLOT x command, where x is the DTIC slot number.
If NDT or ERR is present, check System Parameter 33 — PBX INITIALIZE CODE. The value for this
parameter should be NONE.
Restart the system to reinitialize the DTIC. Then test that the card accepts phone calls.
DTIC Still Does Not Operate Correctly
If you need to call Technical Support, try to provide the symptoms of the problem and the
revision/version of the DTIC software. You can get complete DTIC revision information by connecting to
the DTIC (E1) and using the VERSION command, as in the following example:
@CONN 2
Connecting to E1 in slot 2
dtic>VERSION
**** Version Information ****
Firmware Rev Date Time ChkSum Comment
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
BootROM 3.03 MON DD YYYY 16:40:24 5A32 final DTIC−E1/DLC16 version
Xillinx Images Rev Date Time Filename Package
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
Voice Bus Intf 4.0 05/13/00 19:18:43 vbintf.lca 3042PQ100
DTIC Pass 1 TDM 1.0 01/21/00 18:25:31 tdmint.lca 3042PC84
DTIC pass 2 TDM 1.0 12/21/00 01:46:26 dtctdm.lca 3064PC84
DLIC16 TDM 5.0 11/09/00 17:22:11 116TDM.LCA 3042PQ100
PIC TDM 4.0 09/08/00 18:11:45 PICTDM.LCA 3042PQ100
CODE REV DATE TIME COMMENT
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
DSP 1.67 03/10/00 09:32:40 all 1.65f patches, fix PCM cnvrsn bug
CP 0.01 MAR 20, 2000 13:50 New digit sending method