Filter
Top Products
7-18 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
Example of LAN Channel Number
In this example, the start time (S) is specified as 00 4 21, and the type of filter (PR, for port) is
specified as 101. This example displays all log entries for activities on LAN channel 1, and it shows
message number 10B3 sent to number F68.
@LOG PR CPT
Specify Print Option(s):
”S”tart <time>, ”E”nd <time>, ”L”ine <length>, ”P”age <length> ”\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
>s 00 4 21 pr 101
MM/DD/YY HH:MM:SS PRT TYPE EVENT AUX MBX/EXTN MSG# SL U L SOURCE
D1 D2 D3 D4 D5
04/21/00 07:23:27 L01 LAN_OUT CONNGRANT 1001
04/21/00 07:23:27 L01 LAN_IN VCUCONN
04/21/00 07:23:27 L01 LAN_OUT STATUS VCUREADY
04/21/00 07:23:27 L01 LAN_OUT STATUS VCUCONN
04/21/00 07:23:27 L01 LAN_IN STRTSND
04/21/00 07:23:27 L01 LAN_IN DESTMBX 110
04/21/00 07:23:27 L01 LAN_OUT STRTSND SUCCESS
04/21/00 07:23:27 L01 LAN_OUT DESTMBX SUCCESS 110
04/21/00 07:23:27 L01 LAN_IN MSGDLV NO_EXTN 10B3 151
04/21/00 07:23:27 L01 LAN_MSG CREATE F68
04/21/00 07:23:28 L01 LAN_OUT STATUS SUCCESS
04/21/00 07:23:28 L01 LAN_OUT STATUS COMPLETE
04/21/00 07:23:28 L01 LAN_MSG RCV SUCCESS F68
04/21/00 07:23:29 L01 LAN_IN CLOSEDONE
LOG for Protocol 5 (OctelNet)
You can use the LOG command for tracing various events for Protocol 5 (OctelNet) networking. The
applicable events are provided in Appendix A at the end of this chapter.
The following example uses the LOG PR CPT command for OctelNet information. The start time (S)is
specified as 00 02 09, and the type of filter (TY) is specified as ONT. This example displays all log
entries that start with ONT in the TYPE column.