Filter
Top Products
In-2 Installation and Maintenance Manual Master Index
Octel 200/300 S.4.1 PB60019-01
station extensions, 7.1-23
trunk groups, 7.1-22
hardware requirements, 7.1-7
installation, 7.1-29–7.1-56
installation checklist, 7.1-51–7.1-56
Overture 200/300 configuration, 7.1-25–7.1-56
Called Party Identification, 7.1-26
Overture200/300 configuration, Message Waiting
Indication, 7.1-25
software requirements, 7.1-7
testing, 7.1-29–7.1-56
testing procedure, 7.1-32–7.1-38
AT&T Definity G3 Adaptive Integration with APIC,
configuration, hunt group, 12.1-15
AT&T Definity G3 Conventions, 7.1-8
AT&T Integration Card, 2-8
AT&T System 75 Adaptive Integration, 7.2-1–7.2-56
ATTIC board installation, 7.2-39
configuration requirements, 7.2-7
hardware requirements, 7.2-7
installation, 7.2-29–7.2-56
installation checklist, 7.2-51–7.2-56
maintenance commands, 7.2-47–7.2-56
Overture 200/300 configuration, 7.2-25–7.2-56
Called Party Identification, 7.2-26
Message Waiting Indication, 7.2-25
software requirements, 7.2-7
System 75 configuration
COR, 7.2-9
coverage paths, 7.2-20
hunt group, 7.2-18
naming conventions, 7.2-8
port extensions, 7.2-17
station extensions, 7.2-23
trunk groups, 7.2-21
testing procedure, 7.2-32–7.2-38
AT&T System 85 Adapative Integration with APIC
configuring System 85, 12.3-8
testing, 12.3-21–12.3-34
AT&T System 85 Adaptive Configuration with APIC,
APIC configuration changes, 12.3-10
AT&T System 85 Adaptive Integration, 7.3-1–7.3-49
ATTIC board installation, 7.3-34
call coverage
call coverage groups, 7.3-2
calls forwarding all calls, 7.3-2
Called Party Identification
direct calls from external trunks, 7.3-3
direct internal calls, 7.3-4
forwarded external calls, 7.3-4
forwarded internal calls, 7.3-5
configuration requirements, 7.3-6
hardware requirements, 7.3-6
installation, 7.3-25–7.3-41
installation checklist, 7.3-45–7.3-49
maintenance commands, 7.3-42–7.3-44
Overture 200/300 configuration, 7.3-21–7.3-24
Called Party Identification, 7.3-22
Message Waiting Indication, 7.3-21
software requirements, 7.3-6
System 85 configuration
ATTIC link digital phone and Overture 200/300
port extensions, 7.3-9
call coverage, 7.3-19
Centralized System Management,
7.3B-1–7.3B-32, 12.3B-1–12.3B-14
naming conventions, 7.3-8
station extensions, 7.3-20
System Management Terminal, 7.3A-1–7.3A-10,
12.3A-1–12.3A-7
trunk groups, 7.3-19
testing, 7.3-25–7.3-41
testing procedure, 7.3-28–7.3-33
AT&T System 85 Adaptive Integration with APIC,
12.3-1
APIC board installation, 12.3-27
configuration
call coverage, 12.3-13
hunt group, 12.3-12
station extensions, 12.3-14
trunk groups, 12.3-14
configuration requirements, 12.3-7
configuring, naming conventions, 12.3-8
hardware requirements, 12.3-7
installation, 12.3-21–12.3-34
Overture 200/300 configuration, 12.3-15–12.3-34
software requirements, 12.3-7
ATTIC. See AT&T Integration Card
Auto transfer, to assistance index, INSTALL program,
1-21
Automatic purge, Network Name Confirmation, 9−1
AX mode. See Primary Answering
B
Backup
all messages, 12-4
all names, 12-6
greetings by COS, 12-12
language prompts, 12-20
local names, 12-8
network names, 12-10
personal distribution list nams, 12-18
scripted or sequential mailbox, 12-16
single greeting, 12-14
Backup procedures, 12-3–12-21
Basic MIB, digital networking, SNMP, 11B-2