Filter
Top Products
Call Processing Trace Activities 7A-11
Octel 200/300 S.4.1
PB60019−01
Table 7A-2 EVENT and AUX Activities in Call Process Trace Log (continued)
TYPE
Column
Entry
DESCRIPTION
AUX
Column
Entry
DESCRIPTION
EVENT
Column
Entry
LAN SNMP_QRY SNMP information has been requested. 001
002
Digital performance report
Network traffic report
SNMP_SND SNMP information has been sent.
STATUS NO_ANSWR
FAST_BSY
BUSY
EVENT
RINGING
UNAVAIL
TALKOFF
CAMPON
FAILED
CXPORT
STATUS SUCCESS
COMPLETE
VCUREADY
VCUCONN
Completed function
VCU software ready to connect
VCU software connected
LAN STATUS
(continued)
FAIL
DISKFULL
NOTFND
NONETNAM
UNEXPREQ
Generic failure
Mailbox not found
Network name cannot be updated
Unexpected request
MBXFULL
NORECORD
NTNAMFUL
FWDDEPTH
Mailbox full
Mailbox set to no record COS
NetNam Table full
Max message forwarding depth exceeded
ALL_BSY
OEM_FAIL
REV_FAIL
COURUPDN
All LCH are busy
Failed because of OEM mismatch
Protocol level not supported
Courtesy up/down in progress
TSTERADR
TSTERCON
TSTERDOM
TSTERRDG
TSTERSDG
TSTERFDG
TSTERCOL
TSTSWRCV
CPUCHKER
NOFAXFTR
NOFAXCOS
TNDMLIM
IP address did not match
Connection types do not match
In-domain status does not match
Receiver self digits do not match
Sender self digits do not match
First digit mismatch with senders
Collocated status mismatch
SW error on receive side of testlan
Bad data checksum
Receiver does not have FAX feature
Receiver mbx does not have FAX COS
Msg tandem limit reached
RLANFAIL
LLANFAIL
Remote LAN failure
Local LAN failure
STRTSND Starting send for a new message chain. No. of msgs in message chain is shown
TEST Background port self-test.
TIMESTAMP Debug feature for user to force timestamp
in trace.