Filter
Top Products
Appendix I
K3Tj Intelligent Signal Processor Protocol
297
Read Set Value O3 with Bank (Continuous Units)
(Sequence No. 329)
This sequence reads set value O3 of a bank not in use for continuous units. The word allocation is identical to that
of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O2 with Bank (Continuous Units)
(Sequence No. 330)
This sequence reads set value O2 of a bank not in use for continuous units. The word allocation is identical to that
of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O1 with Bank (Continuous Units)
(Sequence No. 331)
This sequence reads set value O1 of a bank not in use for continuous units. The word allocation is identical to that
of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Holding Data (Sequence No. 332)
Reads the peak/bottom data (maximum, minimum) and stores the results in the specified words.
Send Data Word Allocation (2nd Operand of PMCR)
Relevant unit No.(Undefined)
(Undefined)
Number of units
+0
+1
+2
+3
+64
+65
Number of send data wordsFirst word of
send data
~ ~
Relevant unit No.(Undefined)
Operand
Operand
Offset Contents (data format) Data
+0 Number of send data words
(4 digits BCD)
0004 to 0066
+1 Number of units (2 digits BCD) 01 to 32
+2 Relevant unit No. (2 digits BCD) 00 to 99
+3 Operand (ASCII 2 characters) 5048 (“PH”)
4248 (“BH”)
D
D
D
+65 Operand (ASCII 2 characters) Same as above