Filter
Top Products
2-3SectionWiring
25
2-3-8 Soldering
1, 2, 3... 1. Thread a heat-shrinking tube through each conductor.
2. Temporarily solder each conductor to the corresponding connector termi-
nals.
3. Completely solder each conductor.
Soldering iron
Heat-shrinking tube
Inside diameter:
1.5 mm, l = 10
4. Return the heat-shrinking tube to the soldered portion, then heat the tube to
shrink it in place.
Heat-shrinking tube
2-3-9 Assembling Connector Hood
Assemble the connector Hood as shown below.
End connected to FG
Aluminum foil tape
Grounding plate
End not connected to FG
Adhesive tape