Filter
Top Products
Appendix K3Z4L Laser Micrometer Protocol
322
control codes in the sequence to CR+LF for the send code and to CR or CR+LF for the receive code. See the
settings in the following diagram.
Turn OFF.
Turn OFF (to use a general-purpose interface)
Turn ON (to use a general-purpose interface)
Handshaking
ON: Control (recognize DRT input)
OFF: 3-wire method (non-protocol)
Baud Rate
Baud rate
Pin
Pin 1
Pin 2
1200 2400
4800
9600
OFF
ON
OFF
OFF
OFF
ON
ON
ON
12 34 5 6
The High-speed 3Z4L-3000-series Meters must have the delimiter control codes set using the memory switches.
Set both the send and receive codes to CR+LF.