Filter
Top Products
set vlan name 103
Syntax — set fdb agingtime vlan-id age seconds
vlan-id — VLAN name or number. The timeout period change
applies only to entries that match the specified VLAN.
age seconds — Value for the timeout period, in seconds. You can
specify a value from 0 through 1,000,000. If you change the timeout
period to 0, aging is disabled.
Defaults — The aging timeout period is 300 seconds (5 minutes).
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command changes the aging timeout period
to 600 seconds for entries that match VLAN orange:
WX4400# set fdb agingtime orange age 600
success: change accepted.
See Also
display fdb agingtime on page 94
set vlan name Creates a VLAN and assigns a number and name to it.
Syntax — set vlan vlan-num name name
vlan-num — VLAN number. You can specify a number from 2
through 4095.
name — String up to 16 alphabetic characters long.
VLAN 4094 is reserved for WebAAA.
Defaults — VLAN 1 is named default by default. No other VLANs have
default names.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must assign a name to a VLAN (other than the default
VLAN) before you can add ports to the VLAN.