Filter
Top Products
66 CHAPTER 4: PORT COMMANDS
Port Preference
===========================================================
1 GBIC
2 RJ45
3 GBIC
4 GBIC
Table 13 describes the fields in this display.
See Also
clear port preference on page 60
set port preference on page 80
display port status Displays configuration and status information for ports.
Syntax — display port status [port-list]
port-list — List of physical ports. If you do not specify a port list,
information is displayed for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays information for all ports
on a WX1200 switch:
Table 13 Output for display port preference
Field Description
Port Port number.
Preference Preference setting:
GBIC — The GBIC (fiber) interface is selected as
the active interface.
RJ45 — The RJ-45 (copper) interface is selected
as the active interface.