Filter
Top Products
462 CHAPTER 17: RF DETECTION COMMANDS
Examples — The following example displays information about the
BSSIDs detected in the Mobility Domain managed by the seed switch:
WX1200# display rfdetect mobility-domain
Total number of entries: 3
BSSID WX-IPaddr Port/Radio RSSI SSID
> Radio Mac /Channel
---------------------- --------------- ------------- ---- -----------
00:00:00:01:7a:80
> 00:0b:0e:00:0a:a3 10.8.121.101 5/2/60 -34 wla
> 00:0b:0e:00:04:c8 10.8.121.101 4/2/60 -46 wla
> 00:0b:0e:00:0a:6b 10.8.121.102 3/2/60 -32 wlay
00:00:00:01:d1:41
> 00:0b:0e:00:04:c8 10.8.121.101 4/2/36 -37 wla
> 00:0b:0e:00:0a:a3 10.8.121.101 5/2/36 -33 wla
00:00:00:01:d9:41
> 00:0b:0e:00:0a:a3 10.8.121.101 5/2/52 -66 public
> 00:0b:0e:00:0a:6b 10.8.121.102 3/2/52 -54 public
Table 88 describes the fields in this display.
Table 88 display rfdetect mobility-domain Output
Field Description
BSSID > Radio MAC MAC address of the SSID advertised by the detected device,
and the MAC addresses of the radios that detected the
BSSID.
The BSSID is listed first. The MAC addresses of the 3Com
radios that detected the BSSID are listed underneath the
BSSID.
If a 3Com radio is supporting more than one SSID, each of
the corresponding BSSIDs is listed separately.
WX-IPaddr System IP address of the WX switch that is managing the
MAP that detected the rogue.
Port/Radio/Channel Port number, radio number, and channel number of the
radio that detected the rogue. For a Distributed MAP, the
connection number is labeled dap. (This stands for
distributed ap.)
RSSI Received signal strength indication (RSSI) — the strength of
the RF signal detected by the MAP radio, in decibels referred
to 1 milliwatt (dBm).
SSID Service set identifier (SSID) associated with the BSSID.