Filter
Top Products
set mac-user 207
The following command authorizes users entering the network on WX
ports 1 and 2 to use the floor2 VLAN, overriding any settings from AAA:
WX4400# set location policy permit vlan floor2 if port 1-2
The following command places all users who are authorized for SSID
tempvendor_a into VLAN kiosk_1:
WX1200#
set location policy permit vlan kiosk_1 iff ssid eq
tempvendor_a
success: change accepted
See Also
clear location policy on page 171
display location policy on page 185
set mac-user Configures a user profile in the local database on the WX switch for a
user who can be authenticated by a MAC address, and optionally adds
the user to a MAC user group.
(To configure a MAC user profile in RADIUS, see the documentation for
your RADIUS server.)
Syntax —
set mac-user mac-addr [group group-name]
mac-addr — MAC address of the user, in hexadecimal numbers
separated by colons (:). You can omit leading zeros.
group-name — Name of an existing MAC user group.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — MSS does not require MAC users to belong to user groups.
Users authenticated by MAC address can be authenticated only for
network access through the WX switch. MSS does not support passwords
for MAC users.