Filter
Top Products
474 CHAPTER 18: FILE MANAGEMENT COMMANDS
The following command copies system image WXA03001.Rel from a
TFTP server to boot partition 1 in nonvolatile storage:
WX4400# copy tftp://10.1.1.107/WXA03001.Rel
boot1:WXA03001.Rel
............................................................
................................................success:
received 9163214 bytes in 105.939 seconds [ 86495 byt
es/sec]
The following commands rename test-config to new-config by copying it
from one name to the other in the same location, then deleting
test-config:
WX4400# copy test-config new-config
WX4400# delete test-config
success: file deleted.
The following command copies file corpa-login.html from a TFTP server
into subdirectory corpa in an WX switch’s nonvolatile storage:
WX4400# copy tftp://10.1.1.1/corpa-login.html corpa/corpa-login.html
success: received 637 bytes in 0.253 seconds [ 2517 bytes/sec]
See Also
delete on page 474
dir on page 475
delete Deletes a file.
CAUTION: MSS does not prompt you to verify whether you want to
delete a file. When you press Enter after typing a delete command, MSS
immediately deletes the specified file.
MSS does not allow you to delete the currently running software image
file or the running configuration.
Syntax —
delete url
url — Filename. Specify between 1 and 128 alphanumeric characters,
with no spaces.
If the file is in a subdirectory, specify the subdirectory name, followed
by a forward slash, in front of the filename. For example:
subdir_a/file_a.