3Com 3CRWX440095A Webcam User Manual


 
display security acl map 377
Examples — To display the contents of all security ACLs committed on a
WX switch, type the following command:
WX4400# display security acl info all
ACL information for all
set security acl ip acl_123 (hits #5 462)
---------------------------------------------------------
1. permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 192.168.2.11 0.0.0.0 destination IP any
set security acl ip acl_134 (hits #3 0)
---------------------------------------------------------
1. permit IP source IP 192.168.0.1 0.0.0.0 destination IP any enable-hits
set security acl ip acl_135 (hits #2 0)
---------------------------------------------------------
1. deny IP source IP 192.168.1.1 0.0.0.0 destination IP any enable-hits
The following command displays the contents of acl_123 in the edit
buffer, including the committed ACE rules 1 and 2 and the uncommitted
rule 3:
WX4400# display security acl info acl_123 editbuffer
ACL edit-buffer information for acl_123
set security acl ip acl_123 (ACEs 3, add 3, del 0, modified 0)
---------------------------------------------------------
1. permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 192.168.2.11 0.0.0.0 destination IP any
3. deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits
See Also
clear security acl on page 370
commit security acl on page 373
set security acl on page 384
display security acl
map
Displays the VLANs, ports, and virtual ports on the WX switch to which a
security ACL is assigned.
Syntax
display security acl map acl-name
acl-name — Name of an existing security ACL for which to show
static mapping. ACL names must start with a letter and are
case-insensitive.
Defaults — None.