Filter
Top Products
set service-profile auth-fallthru 301
set service-profile psk-phrase on page 308
set service-profile wpa-ie on page 318
set service-profile
auth-fallthru
Specifies the authentication type for users who do not match an 802.1X
or MAC authentication rule for an SSID managed by the service profile.
When a user tries to associate with an SSID, MSS checks the
authentication rules for that SSID for a userglob that matches the
username. If the SSID does not have an authentication rule that matches
the username, authentication for the user falls through to the fallthru
method.
The fallthru method is a service profile parameter, and applies to all
radios within the radio profiles that are mapped to the service profile.
Syntax —
set service-profile name auth-fallthru
{last-resort | none | web-auth}
last-resort — Automatically authenticates the user and allows
access to the SSID requested by the user, without requiring a
username and password.
none — Denies authentication and prohibits the user from accessing
the SSID.
The authentication method none you can specify for administrative
access is different from the fallthru authentication type none, which
applies only to network access. The authentication method none allows
access to the WX switch by an administrator. The fallthru authentication
type none denies access to a network user. (See “set service-profile
auth-fallthru” on page 301.)
web-auth — Serves the user a web page from the WX switch’s
nonvolatile storage for login to the SSID.
Defaults — The default fallthru authentication type is web-auth.
If a username does not match a userglob in an authentication rule for the
SSID requested by the user, the WX switch that is managing the radio the
user is connected to redirects the user to a web page located on the WX
switch. The user must type a valid username and password on the web
page to access the SSID.
Access — Enabled.