Filter
Top Products
152 CHAPTER 6: IP SERVICES COMMANDS
Defaults — All traps are disabled by default.
Access — Enabled.
ClientRoamingTraps Generated when a client roams.
CounterMeasureStartTraps Generated when MSS begins
countermeasures against a rogue access
point.
CounterMeasureStopTraps Generated when MSS stops
countermeasures against a rogue access
point.
DeviceFailTraps Generated when an event with an Alert
severity occurs.
DeviceOkayTraps Generated when a WX switch returns to its
normal state.
LinkDownTraps Generated when the link is lost on a port.
LinkUpTraps Generated when the link is detected on a
port.
MichaelMICFailureTraps Generated when two Michael message
integrity code (MIC) failures occur within 60
seconds, triggering Wi-Fi Protected Access
(WPA) countermeasures.
MobilityDomainJoinTraps Generated when the WX switch is initially
able to contact a mobility domain seed
member, or can contact the seed member
after a timeout.
MobilityDomainTimeoutTraps Generated when a timeout occurs after a
radio device has unsuccessfully tried to
communicate with a seed member.
MAPBootTraps Generated when a MAP boots.
MAPTimeoutTraps Generated when a MAP fails to respond to
the radio device.
PoEFailTraps Generated when a serious PoE problem,
such as a short circuit, occurs.
RFDetectAdhocUserTraps Generated when MSS detects an ad-hoc
user.
RFDetectRogueAPTraps Generated when MSS detects a rogue access
point.
RFDetectRogueDisappearTraps Generated when a rogue access point is no
longer being detected.
Table 35 SNMP Trap Names (continued)
Name Description