Filter
Top Products
clear radio-profile 235
Usage — When you clear a radio, MSS performs the following actions:
Clears the transmit power, channel, and external antenna setting from
the radio.
Removes the radio from its radio profile and places the radio in the
default radio profile.
This command does not affect the PoE setting.
Examples — The following command disables and resets radio 2 on the
MAP access point connected to port 3:
WX1200# clear ap 3 radio 2
See Also
set {ap | dap} radio mode on page 276
set {ap | dap} radio radio-profile on page 277
set port type ap on page 83
clear radio-profile Removes a radio profile or resets one of the profile’s parameters to its
default value.
Syntax —
clear radio-profile name [parameter]
name — Radio profile name.
parameter — Radio profile parameter:
beacon-interval
dtim-interval
frag-threshold
long-retry
max-rx-lifetime
max-tx-lifetime
preamble-length
rts-threshold
service-profile
short-retry
(For information about these parameters, see the set radio-profile
commands that use them.)