Filter
Top Products
136 CHAPTER 6: IP SERVICES COMMANDS
The following command configures IP interface 10.10.20.10
255.255.255.0 on VLAN mauve:
WX1200# set interface mauve ip 10.10.20.10 255.255.255.0
success: set ip address 10.10.20.10 netmask 255.255.255.0 on vlan mauve
See Also
clear interface on page 109
display interface on page 118
set interface status on page 136
set interface status Administratively disables or reenables an IP interface.
Syntax — set interface vlan-id status {up | down}
vlan-id — VLAN name or number.
up — Enables the interface.
down — Disables the interface.
Defaults — IP interfaces are enabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command disables the IP interface on VLAN
mauve:
WX4400# set interface mauve status down
success: set interface mauve to down
See Also
clear interface on page 109
display interface on page 118
set interface on page 135