Filter
Top Products
set dap 75
mp-372 — Contains one 802.11a radio and one 802.11b radio,
and a connector for an external antenna for the 802.11b/g radio.
Also contains a connector for an optional external 802.11a
antenna. To specify the antenna model, use the following
command:
set {ap | dap} radio antennatype.
radiotype 11a | 11b| 11g — Radio type:
11a — 802.11a
11b — 802.11b
11g — 802.11g
This option applies only to single-radio models. The value 11g does
not apply to model MP-101.
Defaults — The default radio type for model MP-101 is 802.11b. The
default radio type for model AP2750, AP7250, AP8250, MP-241, and
MP-341, and for the 802.11b/g radios in models AP8250, AP8750,
MP-52, MP-252, and MP-262, and MP-352, is 802.11g in regulatory
domains that support 802.11g, or 802.11b in regulatory domains that do
not support 802.11g.
MAP radios configured for 802.11g also allow associations from 802.11b
clients by default. To disable support for 802.11b associations, use the
set radio-profile 11g-only command on the radio profile that contains
the radio.
MAP model MP-262 requires an external antenna for the 802.11b/g
radio. You must specify the antenna model. MAP models MP-341 and
MP-352 have an internal 802.1b/g antenna as well as a connector for an
external antenna, so use of an external antenna is optional on these
models. To specify the model, use the set {ap | dap} radio antennatype
command.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command configures Distributed MAP 1 for
MAP model AP2750 with serial-ID M9DE48B012F00:
WX4400# set dap 1 serial-id M9DE48B012F00 model ap2750
success: change accepted.