Filter
Top Products
display sessions network 451
State Status of the session:
AUTH, ASSOC REQ — Client is being associated by the 802.1X
protocol.
AUTH AND ASSOC — Client is being associated by the 802.1X
protocol, and the user is being authenticated.
AUTHORIZING — User has been authenticated (for example, by
the 802.1X protocol and an AAA method), and is entering AAA
authorization.
AUTHORIZED — User has been authorized by an AAA method.
ACTIVE — User’s AAA attributes have been applied, and the user
is active on the network.
DEASSOCIATED — One of the following:
Wireless client has sent the WX switch a disassociate message.
User associated with one of the current WX switch’s MAP access
points has appeared at another WX switch in the Mobility Domain.
ROAMING AWAY — The W switch has been sent a request to
transfer the user, who is roaming, to another WX switch.
STATUS UPDATED — WX switch is receiving a final update from
an MAP access point about the user, who has roamed away.
WEB_AUTHING — User is being authenticated by WebAAA.
WIRED AUTH’ING — User is being authenticated by the 802.1X
protocol on a wired authentication port.
KILLING — User’s session is being cleared, because of 802.1X
authentication failure, entry of a clear command, or some other
event.
now on IP address and port and radio numbers of the session’s current WX
switch, the MAC address of the MAP access point, and the last update
time.
from IP address and port and radio numbers of the session’s previous WX
switch, the MAC address of the MAP access point, and the last update
time. Up to six roaming events are tracked in this display.
Table 83 Additional display sessions network verbose Output (continued)
Field Description