Filter
Top Products
display service-profile 263
See Also
set service-profile auth-dot1x on page 300
set service-profile auth-fallthru on page 301
set service-profile auth-psk on page 302
set service-profile beacon on page 303
set service-profile cipher-ccmp on page 304
set service-profile cipher-tkip on page 305
set service-profile cipher-wep104 on page 306
set service-profile cipher-wep40 on page 307
set service-profile psk-phrase on page 308
set service-profile psk-raw on page 309
set service-profile rsn-ie on page 310
set service-profile shared-key-auth on page 311
set service-profile ssid-name on page 311
set service-profile ssid-type on page 312
set service-profile tkip-mc-time on page 313
set service-profile web-aaa-form on page 314
WPA enabled Indicates that the Wi-Fi Protected Access (WPA) information
element (IE) is enabled. Additional fields display the settings
of other WPA parameters:
ciphers — Lists the WPA cipher suites advertised by
radios in the radio profile mapped to this service profile.
authentication — Lists the authentication methods
supported for WPA clients:
802.1X — dynamic authentication
PSK — preshared key authentication
TKIP countermeasures time — Indicates the amount of
time (in ms) MSS enforces countermeasures following a
second message integrity code (MIC) failure within a
60-second period.
Note: The WPA fields are displayed only when the WPA IE is
enabled.
Table 56 Output for display service-profile (continued)
Field Description