Filter
Top Products
96 CHAPTER 5: VLAN COMMANDS
The following command lists the number of dynamic entries that the
forwarding database contains:
WX1200# display fdb count dynamic
Total Matching Entries = 2
See Also
display fdb on page 92
display roaming
station
Shows a list of the stations roaming to the wireless LAN switch through a
VLAN tunnel.
Syntax —
display roaming station
[vlan vlan-id] [peer
ip-addr]
vlan vlan-id — Output is restricted to stations using this VLAN.
peer ip-addr — Output is restricted to stations tunnelling through
this peer WX switch in the Mobility Domain.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — The output displays roaming stations within the previous 1
second.
Examples — To display all stations roaming to the WX switch, type the
following command:
WX4400# display roaming station
User Name Station IP Addr Old AP MAC VLAN State
----------------------- --------------- ----------------- -------------- ------
redsqa 0.0.0.0 00:00:00:00:00:00 violet Up