Filter
Top Products
clear ntp server 113
set ip telnet on page 146
set ip telnet server on page 147
clear ntp server Removes an NTP server from a WX switch configuration.
Syntax — clear ntp server {ip-addr | all}
ip-addr — IP address of the server to remove, in dotted decimal
notation.
all — Removes all NTP servers from the configuration.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command removes NTP server
192.168.40.240 from a WX switch configuration:
WX4400# clear ntp server 192.168.40.240
success: change accepted.
See Also
clear ntp update-interval on page 113
display ntp on page 126
set ntp on page 148
set ntp server on page 148
set ntp update-interval on page 149
clear ntp
update-interval
Resets the NTP update interval to the default value.
Syntax — clear ntp update-interval
Defaults — The default NTP update interval is 64 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.