Filter
Top Products
460 CHAPTER 17: RF DETECTION COMMANDS
Only one MAC address is listed for each 3Com radio, even if the radio is
beaconing multiple SSIDs.
Examples — The following command shows the devices detected by this
WX switch during the most recent RF detection scan:
WX1200# display rfdetect data
Total number of entries: 7
BSSID Port/Rad Chan RSSI Age SSID
----------------- -------- ------ ---- --- --------
00:06:25:09:39:4a 5/1 3 0 15 rack29-hostap
00:06:25:51:e9:ff 4/1 10 -85 15 Arrow
00:06:25:51:e9:ff 5/1 10 -84 15 Arrow
00:0b:0e:00:00:00 4/1 1 -78 15 gary-eng
00:0b:0e:00:02:00 4/1 11 -76 15 public
00:0b:0e:00:02:00 5/1 11 -74 15 public
00:0b:0e:00:02:01 4/1 56 -68 15 public
Table 87 describes the fields in this display.
See Also
display rfdetect mobility-domain on page 461
display rfdetect visible on page 463
Table 87 display rfdetect data Output
Field Description
BSSID BSSID detected by a MAP radio on this WX switch.
Port/Rad MAP and radio MAP that detected the BSSID.
For a directly connected MAP, the MAP port number and
radio number are listed. For a Distributed MAP, the
connection number and radio number are listed.
Chan Number of the channel on which the MAP radio detected
the BSSID.
RSSI Received signal strength indication (RSSI) — the strength of
the RF signal detected by the MAP radio, in decibels referred
to 1 milliwatt (dBm).
Age Age of the rogue listing, in seconds. Rogues age out of the
rogue list after one minute.
SSID Service set identifier (SSID) associated with the BSSID.