Filter
Top Products
set authentication web 201
See Also
clear authentication mac on page 169
display aaa on page 180
set authentication admin on page 189
set authentication console on page 191
set authentication dot1x on page 193
set authentication last-resort on page 197
set authentication web on page 201
set authentication
web
Configures an authentication rule to allow a user to log in to the network
using a web page served by the WX switch. The rule can be activated if
the user is not otherwise granted or denied access by 802.1X, or granted
access by MAC authentication.
Syntax —
set authentication web {ssid ssid-name | wired}
user-glob method1 [method2] [method3] [method4]
user-glob — A single user or a set of users.
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
to specify a set of usernames up to or following the first delimiter
character—either an at sign (@) or a period (.). (For details, see “User
Globs” on page 24.)
ssid ssid-name — SSID name to which this authentication rule
applies. To apply the rule to all SSIDs, type any.
wired — Applies this authentication rule specifically to users
connected to a wired authentication port.
method1, method2, method3, method4 — At least one and up to four
methods that MSS uses to handle authentication. Specify one or more
of the following methods in priority order. MSS applies multiple
methods in the order you enter them.
A method can be one of the following:
local — Uses the local database of usernames and user groups on
the WX switch for authentication.