Filter
Top Products
138 CHAPTER 6: IP SERVICES COMMANDS
See Also
clear ip dns domain on page 110
clear ip dns server on page 111
display ip dns on page 120
set ip dns domain on page 138
set ip dns server on page 139
set ip dns domain Configures a default domain name for DNS queries. The wireless LAN
switch appends the default domain name to domain names or
hostnames you enter in commands.
Syntax —
set ip dns domain name
name — Domain name of between 1 and 64 alphanumeric characters
with no spaces (for example, example.org).
Defaults — None.
Access — Enabled.
Usage — To override the default domain name when entering a
hostname in a CLI command, enter a period at the end of the hostname.
For example, if the default domain name is example.com, enter
chris. if
the fully qualified hostname is chris and not chris.example.com.
Aliases take precedence over DNS. When you enter a hostname, MSS
checks for an alias with that name first, before using DNS to resolve the
name.
Examples — The following command configures the default domain
name example.com:
WX1200# set ip dns domain example.com
Domain name changed
See Also
clear ip dns domain on page 110
clear ip dns server on page 111
display ip dns on page 120
set ip dns on page 137