Filter
Top Products
display ip telnet 125
display ip telnet Shows information about the Telnet management port.
Syntax —
display ip telnet
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status Port
----------------------------------
Enabled 23
Table 32 describes the fields in this display.
See Also
clear ip telnet on page 112
display ip https on page 121
set ip https server on page 140
set ip telnet on page 146
set ip telnet server on page 147
Table 32 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
Enabled
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.