Filter
Top Products
display port-group 63
Examples — The following command shows octet statistics for port 3:
WX1200> display port counters octets port 3
Port Status Rx Octets Tx Octets
=============================================================================
3 Up 27965420 34886544
This command’s output has the same fields as the monitor port
counters command. For descriptions of the fields, see Table 16 on
page 70.
See Also
clear port counters on page 58
monitor port counters on page 68
display port-group Shows port group information.
Syntax — display port-group [all | name group-name]
all — Shows information for all port groups.
name group-name — Shows information for the specified port group.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the configuration of port
group server2:
WX1200# display port-group name server2
Port group: server2 is up
Ports: 5, 7
Table 11 describes the fields in the display port-group output.
Table 11 Output for display port-group
Field Description
Port group Name and state (enabled or disabled) of the port
group.
Ports Ports contained in the port group.