508 CHAPTER 21: BOOT PROMPT COMMANDS
Table 96 describes the fields in the display.
See Also
■ “change” on page 503
■ “create” on page 504
■ “delete” on page 505
■ “next” on page 511
fver Displays the version of a system image file installed in a specific location
on a WX switch.
Syntax —
fver {c: | d: | e: | f: | boot0: | boot1:}
[filename]
■ c: — Nonvolatile storage area containing boot partition 0 (primary).
Table 96 Output of display command
Field Description
BOOT Index Boot profile slot, which can be a number from 0 to 3.
BOOT TYPE Boot type:
■ c — Compact flash. Boots using nonvolatile storage or a
flash card.
■ n — Network. Boots using a TFTP server.
DEVICE Location of the system image file:
■ c: — Nonvolatile storage area containing boot partition 0
■ d: — Nonvolatile storage area containing boot partition 1
■ e: — Primary partition of the flash card in the flash card
slot
■ f: — Secondary partition of the flash card in the flash
card slot
■ boot0 — boot partition 0
■ boot1 — boot partition 1
FILENAME System image file name.
FLAGS Number representing the bit settings of boot flags to pass to
the booted system image.
OPTIONS String up to 128 bytes of boot options to pass to the booted
system image.
