Filter
Top Products
set location policy 205
eq — Applies the location policy rule to all usernames matching
user-glob.
neq — Applies the location policy rule to all usernames not
matching user-glob.
For user-glob, specify a username, use the double-asterisk wildcard
character (**) to specify all usernames, or use the single-asterisk
wildcard character (*) to specify a set of usernames up to or following
the first delimiter character, either an at sign (@) or a period (.). (For
details, see “User Globs” on page 24.)
before rule-number — Inserts the new location policy rule in front of
another rule in the location policy. Specify the number of the existing
location policy rule. (To determine the number, use the display
location policy command.)
modify rule-number — Replaces the rule in the location policy with
the new rule. Specify the number of the existing location policy rule.
(To determine the number, use the display location policy
command.)
port port-list — List of physical port(s) by which to determine if the
location policy rule applies.
Defaults — By default, users are permitted VLAN access and assigned
security ACLs according to the VLAN-Name and Filter-Id attributes
applied to the users during normal authentication and authorization.
Access — Enabled.
History —Introduced in MSS Version 3.0. SSID option added in MSS
Version 3.2.
Usage — Only a single location policy is allowed per WX switch. Once
configured, the location policy becomes effective immediately. To disable
location policy operation, use the clear location policy command.
Conditions within a rule are ANDed. All conditions in the rule must match
for MSS to take the specified action. If the location policy contains
multiple rules, MSS compares the user information to the rules one at a
time, in the order the rules appear in the switch’s configuration file,
beginning with the rule at the top of the list. MSS continues comparing
until a user matches all conditions in a rule or until there are no more
rules.