Filter
Top Products
296 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
See Also
set radio-profile mode on page 291
display radio-profile on page 257
set radio-profile
service-profile
Maps a service profile to a radio profile. All radios that use the radio
profile also use the parameter settings, including SSID and encryption
settings, in the service profile.
Syntax —
set radio-profile name service-profile name
radio-profile name — Radio profile name of up to 16 alphanumeric
characters, with no spaces.
service-profile name — Service profile name of up to 16
alphanumeric characters, with no spaces.
Defaults — A radio profile does not have a service profile associated
with it by default. In this case, the radios in the radio profile use the
default settings for parameters controlled by the service profile. Table 58
lists the parameters controlled by a service profile and their default
values.
Table 58 Defaults for Service Profile Parameters
Parameter Default Value
Radio Behavior When Parameter Set
to Default Value
auth-dot1x enable When the Wi-Fi Protected Access (WPA)
information element (IE) is enabled, uses
802.1X to authenticate WPA clients.
auth-fallthru web-auth Uses WebAAA for users who do not
match an 802.1X or MAC authentication
rule for the SSID requested by the user.
auth-psk disable Does not support using a preshared key
(PSK) to authenticate WPA clients.
beacon enable Sends beacons to advertise the SSID
managed by the service profile.
cipher-ccmp disable Does not use Counter with Cipher Block
Chaining Message Authentication Code
Protocol (CCMP) to encrypt traffic sent to
WPA clients.