Filter
Top Products
display auto-tune neighbors 251
display radio-profile on page 257
set {ap | dap} radio auto-tune max-power on page 270
set {ap | dap} radio auto-tune max- retransmissions on page 271
set radio-profile auto-tune channel-config on page 281
set radio-profile auto-tune channel-holddown on page 282
set radio-profile auto-tune channel-interval on page 283
set radio-profile auto-tune power-backoff- timer on page 284
set radio-profile auto-tune power-config on page 285
set radio-profile auto-tune power-interval on page 286
display auto-tune
neighbors
Displays the other 3Com radios and third-party 802.11 radios that a
3Com radio can hear.
Syntax —
display auto-tune neighbors
[ap map-num [radio {1 | 2| all}]]
Syntax — display auto-tune neighbors
[dap dap-num [radio {1 | 2| all}]]
map-num — MAP port connected to the MAP access point for which to
display neighbors.
dap-num — Number of a Distributed MAP for which to display
neighbors.
radio 1 — Shows neighbor information for radio 1.
radio 2 — Shows neighbor information for radio 2. (This option does
not apply to single-radio models.)
radio all — Shows neighbor information for both radios.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.