Filter
Top Products
362 CHAPTER 11: IGMP SNOOPING COMMANDS
History — Introduced in MSS Version 3.0.
Examples — The following command enables multicast router
solicitation on VLAN orange:
WX1200# set igmp mrsol enable vlan orange
success: change accepted
See Also
set igmp mrsol mrsi on page 362
set igmp mrsol mrsi Changes the interval between multicast router solicitations by a WX on
one VLAN or all VLANs.
Syntax —
set igmp mrsol mrsi seconds [vlan vlan-id]
seconds — Number of seconds between multicast router solicitations.
You can specify a value from 1 through 65,535.
vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, MSS changes the multicast router solicitation interval for all
VLANs.
Defaults — The interval between multicast router solicitations is 30
seconds by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You cannot add MAP access ports or wired authentication
ports as static multicast ports. However, MSS can dynamically add these
port types to the list of multicast ports based on multicast traffic.
Examples — The following example changes the multicast router
solicitation interval to 60 seconds:
WX1200# set igmp mrsol mrsi 60
success: change accepted.
See Also
set igmp mrsol on page 361.