Filter
Top Products
set mobility-profile 215
Examples — The following command creates the MAC user group
eastcoasters and assigns the group members to VLAN orange:
WX4400# set mac-usergroup eastcoasters attr vlan-name orange
success: change accepted.
See Also
clear mac-usergroup attr on page 175
display aaa on page 180
set mobility-profile Creates a Mobility Profile and specifies the MAP access point and/or
wired authentication ports on the WX switch through which any user
assigned to the profile is allowed access.
Syntax —
set mobility-profile name name {port {none | all |
port-list}} | {dap {none | all | dap-num}}
name — Name of the Mobility Profile. Specify up to 32 alphanumeric
characters, with no spaces.
none — Prevents any user to whom this profile is assigned from
accessing any MAP access point or wired authentication port on the
WX switch.
all — Allows any user to whom this profile is assigned to access all
MAP access ports and wired authentication port on the WX switch.
port-list — List of MAP access ports or wired authentication ports
through which any user assigned this profile is allowed access. The
same port can be used in multiple Mobility Profile port lists.
dap-num — List of Distributed MAP connections through which any
user assigned this profile is allowed access. The same Distributed MAP
can be used in multiple Mobility Profile port lists.
Defaults — No default Mobility Profile exists on the WX switch. If you do
not assign Mobility Profile attributes, all users have access through all
ports, unless denied access by other AAA servers or by access control lists
(ACLs).
Access — Enabled.
History —Introduced in MSS Version 3.0.