Filter
Top Products
472 CHAPTER 18: FILE MANAGEMENT COMMANDS
Examples — The following commands back up the configuration file on
an WX switch, reset the switch to its factory default configuration, and
reboot the switch:
WX4400# copy configuration tftp://10.1.1.1/backupcfg
success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec]
WX4400# clear boot config
success: Reset boot config to factory defaults.
WX4400# reset system force
...... rebooting ......
See Also
display config on page 478
reset system on page 485
copy Performs the following copy operations:
Copies a file from a TFTP server to nonvolatile storage.
Copies a file from nonvolatile storage or temporary storage to a TFTP
server.
Copies a file from one area in nonvolatile storage to another.
Copies a file to a new filename in nonvolatile storage.
Syntax —
copy source-url destination-url
source-url — Name and location of the file to copy. The uniform
resource locator (URL) can be one of the following:
[subdirname/]filename
file:[subdirname/]filename
tftp://ip-addr/[subdirname/]filename
tmp:filename
For the filename, specify between 1 and 128 alphanumeric characters,
with no spaces. Enter the IP address in dotted decimal notation.
The subdirname/ option specifies a subdirectory.
destination-url — Name of the copy and the location where to
place the copy. The URL can be one of the following:
[subdirname/]filename
file:[subdirname/]filename
tftp://ip-addr/[subdirname/]filename