Filter
Top Products
40 CHAPTER 3: SYSTEM SERVICE COMMANDS
location — Resets the location of the WX switch to null.
name — Resets the name of the WX switch to the default system
name, which is the model number.
Defaults — None.
Access — Enabled.
History — —Introduced in MSS Version 3.0.
Examples — To clear the location of the WX switch, type the following
command:
WX4400# clear system location
success: change accepted.
See Also
display config on page 478
display system on page 42
set system contact on page 51
set system countrycode on page 51
set system ip-address on page 53
set system location on page 54
display banner
motd
Shows the banner that was configured with the set banner motd
command.
Syntax —
display banner motd
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To show the banner with the message of the day, type the
following command:
WX4400# display banner motd
hello world