Filter
Top Products
416 CHAPTER 14: RADIUS AND SERVER GROUP COMMANDS
(24 hours). A zero value causes the switch to identify unresponsive
servers as available.
key string — Password (shared secret key) the WX switch uses to
authenticate to the RADIUS server. You must provide the same
password that is defined on the RADIUS server. The password can be
1 to 32 characters long, with no spaces or tabs.
author-password password — Password used for authorization to a
RADIUS server for MAC users. Specify a password of up to
32 alphanumeric characters with no spaces or tabs.
Defaults — Default values are listed below:
auth-port — UDP port 1812
acct-port — UDP port 1813
timeout — 5 seconds
retransmit — 3 (the total number of attempts, including the first
attempt)
deadtime — 0 (zero) minutes (The WX switch does not designate
unresponsive RADIUS servers as unavailable.)
key — No key
author-password — When using RADIUS for authentication, a MAC
user’s MAC address is also used as the default authorization password
for that user, and no global authorization password is set. A last-resort
user’s default authorization password is 3Com.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — For a given RADIUS server, the first instance of this command
must set both the server name and the IP address and can include any or
all of the other optional parameters. Subsequent instances of this
command can be used to set optional parameters for a given RADIUS
server.
To configure the server as a remote authenticator for the WX switch, you
must add it to a server group with the set server group command.
Do not use the same name for a RADIUS server and a RADIUS server
group.