Filter
Top Products
328 CHAPTER 10: STP COMMANDS
display spantree
portfast
Displays STP uplink fast convergence information for all network ports or
for one or more network ports.
Syntax —
display spantree portfast [port-list]
port-list — List of ports. If you do not specify any ports, MSS
displays uplink fast convergence information for all ports.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows uplink fast convergence
information for all ports:
WX1200# display spantree portfast
Port Vlan Portfast
------------------------- ---- ----------
1 1 disable
2 1 disable
3 1 disable
4 1 enable
5 1 disable
6 1 disable
7 1 disable
8 1 disable
Table 61 describes the fields in this display.
See Also
set spantree portfast on page 341
Table 61 Output for display spantree portfast
Field Description
Port Port number.
VLAN VLAN number.
Portfast State of the uplink fast convergence feature:
Enable
Disable