Filter
Top Products
set ip alias 137
set ip alias Configures an alias, which maps a name to an IP address. You can use
aliases as shortcuts in CLI commands.
Syntax —
set ip alias name ip-addr
name — String of up to 32 alphanumeric characters, with no spaces.
ip-addr — IP address in dotted decimal notation.
Defaults — None.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command configures the alias HR1 for IP
address 192.168.1.2:
WX4400# set ip alias HR1 192.168.1.2
success: change accepted.
See Also
clear ip alias on page 110
display ip alias on page 119
set ip dns Enables or disables DNS on a wireless LAN switch.
Syntax —
set ip dns {enable | disable}
enable — Enables DNS.
disable — Disables DNS.
Defaults — DNS is disabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command enables DNS on a WX switch:
WX1200# set ip dns enable
Start DNS Client