Filter
Top Products
290 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
See Also
display radio-profile on page 257
set radio-profile mode on page 291
set radio-profile short-retry on page 299
set radio-profile
max-rx-lifetime
Changes the maximum receive threshold for the MAP radios in a radio
profile. The maximum receive threshold specifies the number of
milliseconds that a frame received by a radio can remain in buffer
memory.
Syntax —
set radio-profile name max-rx-lifetime time
name — Radio profile name.
time — Number of milliseconds. You can enter a value from 500
(0.5 second) through 250,000 (250 seconds).
Defaults — The default maximum receive threshold for MAP radios is
2000 ms (2 seconds).
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must disable all radios that are using a radio profile before
you can change parameters in the profile. Use the set radio-profile
mode command
.
Examples — The following command changes the maximum receive
threshold for radio profile rp1 to 4000 ms:
WX4400# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.
See Also
set radio-profile mode on page 291
set radio-profile max-tx-lifetime on page 291
display radio-profile on page 257